Fa-Version 2 for Subwoofer Class H Analog Active Line Array Digital Amplifier

• Type: Professional Amplifier
• Usage: Professional Speaker
• Used For: Professional
• Tube Type: Transistor Amplifier
• Function: Post Amplifier
• Sound Channel: 2.0
• Model NO.: FA-5001 8001
• Output Number: 2
• Voltage: AC:220
• Element Number: /
• Conductive Mode: AC
• Output Circuit: Class H
• S/N Ratio: 105dB
• Input Sensitivity: 0.775V/1.0V/1.44V
• Limiting Protection: Can Reach 4V
• Transport Package: Carton
• Specification: 483× 450× 88mm
• Origin: Gunagzhou
• HS Code: 8518400090

Product Description

Specification
  

Model	FA-5001	FA-8001
8Ω output power/stereo	2×1300W	2×1800W
8Ωoutput power/stereo	2×2000W	2×2400W
4Ωoutput power/stereo	2×2400W	2×2900W
8Ωoutput power/bridging	1×3900W	1×4800W
4Ωoutput power/bridging	1×4900W	1×5800W
Output circuit	Class H
Rated power	20Hz-20KHz(+0/-0.5dB)
Conversion rate	≥40V/us
Damping coefficient	>550@8Ω
Input impedance	20KΩ(balanced)/10KΩ(unbalanced)
Phase response	>100dB@8Ω1KHz
Limiting protection	Can reach 4V
Signal to noise ratio (rated power 8Ω)	≥105dB
Separation degree	>85dB@8Ω1KHz
Total harmonic distortion (half power)	<0.05%@8Ω1KHz
Intermodulation distortion (half power)	≤0.2%
Input sensitivity	0.775V/1.0V/1.44V
Input connector	2× three core XLR female seat/2× three core XLR male seat
Output connector	2×NL4FX four core audio connector red positive black negative terminal
Power connector	AC220V(50Hz-60Hz)
Control and indication/front panel	AC switch,pow power light(white to blue)SIG signal light(green)CLP distortion signal light(yellow)POR protection light(red)
Surface treatment	Black painted chassis, black painted/aluminum front panel
Protection system	DC, short circuit, overheating, soft start output/input overload protection
Cooling system	Intelligent temperature controlled continuous variable speed fan, with front to back air flow
Product volume	0.05m³
Product height	2U
Product size(W×D×H)	483×450×88mm
Packaging size(W×D×H)	550×522×132mm
Product weight(kg)	22.8kg		23.74kg
Packaging weight(kg)	23.8kg		24.74kg

Product Characteristics

FA series is the professional two-channel Analog amplifier used Class Hamplification circuit with RMS equal, which offer more efficiency, more powerand less heat. It is offer various power ratings in 2 models from 2x2000watt/ch.@ 4 ohm to 2x2200 watts/ch @ 4 ohm.


Features
1.Professional aluminum metal cabinet shows its stability,reliability, and fascination.
2.Advanced output H-class circuit ensuring perfect sound quality condition, and the power and eficiency are higher than the conventional AB-class circuit.
3.Effective heat dissipation system, comprising a high surface area of the heat sink, a pair of dual cooling fan to ensure a rapid and reliablecooling.Good quality and rugged construction for most of the expansion of applications are ideal power amplifer. Al amplifer are similar inoperation. the manual applies to all modes. The manual contains very important informaton, so in the connection or operation of your amplifercarefully read the manual.
4.The unit has consummate working staus indications including, you can be clear at aglance of the working status through the LED indicator in the front panel of the amplifier, the letthe operation more easily.
5. Perfect Protection Circuit Design:
A. Soft start.
B. Over temperature protection.
C.Over lad protection.
D. Short Circuit Limited Protection.
E. AC Line fuse
F. Limiter Protection.
G. DC protection.
H. Thermal cut.

Company Introduction

Guangzhou Seer Audio CO.,LTD is a professional sound system manufacturing company. Our factory specialize in manufacture speaker cabinet, loudspeaker, Tweeter component, amplifier, processor and stage equipment. Our sound system company was established in 1997, and the manufacturing company was established in 2004.We focus on the quality and stability of our products and aim to provide high quality products to our customers. Seer Audio use the most advanced engineering to make sure every product meets the requirements of the most professional and demanding applications. We are always working on expanding the scope of business all over the world. Our products won great deal of honour, such as ISO 9001:2000 quality system authentication, all of our goods pass ROSH test and got CE certificate. We have full confidence in our factory and our future. 

Different kinds of products are available in our company. We're pleased to get your Inquiry and we will reply you as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.
 

FAQ

Q1.Can we have our logo or company information on your profucts or packages?
A1.Sure. We accept OEM/ODM orders. Just let us know your requirements.

Q2.Are you a pro-audio manufacturer or trade company?
A2.We are a 100% manufaturer located in Guangzhou.We specialize in R&D, manufaturing, sales.

Q3.How long can we expect delivery?
A3.The high season takes a month and the low season takes 15 days.

Q4.What is the What is the minimum order quantity? How to pay?
A4.The minimum order quantity is one, we only accept T/T.